Tips For Replacing a Window Handle
Switching the handle on your window is an easy project that can be accomplished in the at-home comforts of your home. Use these helpful tips to ensure a smooth operation and great appearance.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Take a measurement of the spindle to be sure you're getting the right size replacement.
1. Take a measurement of the Spindle Length
It's important that you ensure the correct size of the spindle when replacing the window handle. This is because it can determine how tight or loose the handle is, and whether it will lock correctly inside the frame of the window. The spindle is a steel shaft that connects the handle to the lock in the window frame. The spindle can be either a standard industry 8mm cross-section or the older 9mm versions. Modern industry standards are 8mm, however it wasn't always this way. It is important to verify the measurements prior to buying a new handle.
Remove the handle. This can be done easily by turning the handle in the open position, and unwinding two screws that hold the handle in place (which are usually hidden behind plastic caps that will need to removed). After the handle is removed, take a measurement from the base to the end. This will provide you with the measurements needed to buy a replacement.
There are a lot of options when it comes to choosing a new window handle, from sleek chrome that fits into modern homes to traditional burnished brass that looks wonderful in restored Georgian rooms, or even the more quaint Tudor cottages with curved monkey tail latches! The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are typically installed to uPVC windows and are identical in size, with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Window handles from Cadenza are different in size since they have an angled blade that operates with a multi-point locking mechanism within the window.
Another aspect to consider when selecting a new window handle is knowing what hand you need, this is simply defined by the hand you use to open the door. Inline espag handles can be used with either left or right-handed windows. Cranked window handles are only used on windows that are open in one direction.
2. Remove the Handle
Whether the handle is damaged or worn out, a window handle that is shattered is a major source of frustration. However, the good news is that replacing the uPVC window handle is a straightforward job that you can do yourself. All you need is some basic tools and some time to complete the job.
You must first open the window and ensure that it is not locked. Then, remove the screws that hold the handle in place. After the screw caps are removed then you'll be able to remove the handle.
The handle itself is fixed to a spindle within the window frame. Based on the type the handle is held in place with a screw or pin. The most common handle types are inline Espagnolette handles and handles with cockspurs. Both of these kinds of handles are employed on casement windows, including aluminium windows. You can lock the handles with a key to block access by unauthorised persons from the outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you will require a flat-bladed screwdriver. Once the clip is released, the handle should slide off the spindle. When the handle is removed, you will need to measure the length of the spindle and make sure that the new handle is compatible with the spindle's length.
Once you have the correct size, you can put the new handle in place. It is important to ensure that the handle is securely fastened and that it is rotating in the proper direction (clockwise when the handle is open or counterclockwise if the handle is closed). It is also essential to check that it is not fitted upside down.
Replace the screw caps. After you've done this then you can test the handle to make sure that it works properly. You can also test the locking system by shifting the handle from the unlocked position to the locked one and back.
3. Take the Screws off
A uPVC window handle is an essential element of any home and is often the first thing to show signs of wear and wear or damage. This could be due natural factors, regular use, or even damage caused by criminals trying to gain access to your home. A simple repair can fix the issue and stop it from repeating itself.
UPVC handles can be difficult to open if the locking mechanism isn't functioning properly. It is often possible to fix the problem by replacing the multipoint locking mechanism instead of the entire handle. This could help you save money.
After you've removed the old handle you'll need to take off the screws that were that held it in place. These screws are usually located on the inside of the base of the handle. You may require a screwdriver for this and it's essential to not over tighten as this can cause the handle to loosen.
Then, you'll have to find the pins or screws that hold the handle in place. They will likely be found on the inside of the handle base and you will need to use a screwdriver or a pair of pliers to take them off the screws. If you want to replace them, you should replace the caps on the screw and test the handle to make sure it functions properly.
When you're ready for installing the new handle, simply line up the spindle with the cutout in the window mechanism and screw it into the appropriate position. Make sure the handle is in an open position and that the screws are tightly fixed before replacing the screws' covers, if you wished to do so. Then you can enjoy the newly installed window handle. We hope this will allow you avoid the need for expensive window and door replacements in the future. Contact us if you require more information on this or any other aspect of your uPVC window.
4. Install the New Handle
The process of replacing a broken window handle or updating it is easy and can be accomplished in just a few steps. The key is to identify the type of handle, measure its spindle and identify the tools you'll require to complete the task. Safety is always the primary priority when working with tools and windows. Be sure to follow the steps and make sure that you have the right handle to use.
The first step is to identify the screws holding your existing window handle in place. Then, remove these, whilst keeping an adequate grip on the handle to prevent it from falling and result in injury. Once the screws have been removed, you can place them in a safe place to be replaced later.
After removing the old handle, you can now begin to put in your new one. The handle needs to be perfectly positioned in order to function correctly and keep the window in its closed position. The next step is to slide the metal square on the back of the handle into the hole of your window mechanism, making sure it is secure.
Now that the new handle is in place, the last thing to do is replace the screw caps and check to see if it works. If you are not satisfied with the result or if your window does not open or close correctly, call our experts for help.
Almost upvc door handle are equipped with uPVC Windows. Therefore, a large number of windows will require replacement at some point due to damage or wear. The procedure is simple and can be carried out by anyone with some experience in DIY. The most crucial aspect to the success of the procedure is to ensure that you're using a handle which matches your window's dimensions and style. If you're not sure what kind of handle you'll need, feel free to reach out to our team, who will be able to provide you with the options available.